ELBO CONTROLLI SETHY SIX, Инструкция по установке, эксплуатации и обслуживанию, Страница: 80 / 96

11 TOOL SETS ELBO CONTROLLI srl
SETHY SIX
After entering the tools, press the esc key to display the Tool Set list connected to the
active machine origin.
11.3 Tool set modification
Follow the procedure in para. 11.2 to modify a set already present in the list. Select the set
key to access it and then press the “modify tool set” key.
11.4 Tool set deletion
It is possible to delete a previously saved tool set but keep in mind that you will also delete
all tools connected to that set.
Select the set you want to delete and then press “tool set delete”.
Confirm to delete.
By deleting the set, the matching tools will be deleted too.
11.5 Tool set copy
The copy function allows you to copy a tool table from one machine to another.
In this way, you don’t need to re-write or re-measure a whole tool set if a new machine is
used.
Select a set, press the “copy tool set” key to access a window to select the machine.
Page 80 of 96