ELBO CONTROLLI SETHY SIX, Инструкция по установке, эксплуатации и обслуживанию, Страница: 54 / 96

9 212V VISION SYSTEM ELBO CONTROLLI srl
SETHY SIX
As we see in the following chapters, the value of the shown angle can be directly imported into the tool
table or used to rapidly print the tool label.
Press this key to quit the measurement function.
9.8.3 Automatic radii measurement
This function is active both in fixed grid mode and in autocollimation, it allows
you to automatically identify and calculate the value of the radius on the framed
profile and to acquire it for the tool table or rapid printing of a label.
When it is activated, the function works in real time; this means that the profile is
constantly examined and the operator decides if the data acquired is exact or not. As
in autocollimation, the operator has to make the shown image as clear as possible in
order to measure it: focusing, cleaning from dust and chips and correct framing.
Page 54 of 96
Figure 26: Complementary angle measurement
Pass to the prior
angle display
Measured
angle
Point of
intersection
PX - PZ