ELBO CONTROLLI SETHY SIX, Инструкция по установке, эксплуатации и обслуживанию, Страница: 34 / 96

8 PRELIMINARY OPERATIONS ELBO CONTROLLI srl
SETHY SIX
8 PRELIMINARY OPERATIONS
8.1 Axes reference points
When Sethy Six is switched on, it will automatically look for axes reference points, engraved on the
measurement optical scales. In these fixed positions, the software will indicate the origin of any NC
machine.
For this reason the axes values will be red, indicating that the machine cannot display any significant
measurement due to the lack of reference to a machine origin.
In these conditions the keys for machine origin and tool tables are disabled.
✔
The only possible measurement is to commute the axes incrementally, by giving a subjective reference
which will however be lost if the axis passes on the reference zero point of the optical scale.
Move both axes until they reach the zero references on the optical scale to activate the default origin and
display the corresponding value in white as shown in the following picture.
The machine origin function is now enabled.
Page 34 of 96
Figure 15: Machine zero not reached
Report zero axis not reached warning
No axes reference
Disabled funtcions