ELBO CONTROLLI SETHY SIX, Инструкция по установке, эксплуатации и обслуживанию, Страница: 29 / 96

7 MAIN CONTROLS ELBO CONTROLLI srl
SETHY SIX
3.
Upper right quadrant,
where you can set up the functions of the machine.
Date and time are given by the operative system.
Touch the Elbo Controlli logo to access the Presetter Sethy SIX setup page.
Touch the machine origin key (active after the acquisition of the zero axis) to access the creation,
modification and cancellation functions of machine origin.
Touch the drop-down menu indicating the active machine origin to select the origin to use choosing from
the available ones in the database.
Touch the Tool Set key, active after the acquisition of the zero axis and with an active machine origin
different from “DEFAULT MACHINE” to create, modify and cancel tool tables.
Touch the Camera Function key to open a window through which you can use the calculation functions
and inspection functions of the camera.
Touch the Fixed grid key to enable all measurements and functions in the centre of the display area. (Par.
9.4)
Touch the autocollimation key to take measurements in any part of the screen, only if a correct focusing
of the tool has been made (Par 9.5).
By activating the function “freeze value”, in autocollimation mode, it’s possible to rotate the spindle
maintaining the maximum tangency value measured during the rotation (Par 9.6.3).
All these functions will be analysed and described in the following chapters.
Page 29 of 96
Presetter
Setup
Active machine origin
Date and time
Machine
origins
Tool set
Camera system
functions
Fixed grid Autotargeting
Measurement
“freezing”