ELAUT Big One X-treme, Руководство пользователя

Страница: 92 / 127

TECHNICAL SHEET : SAFETY REPORT OF BIG ONE X-TREME
5/5
IV.1.2 EARTH CONTINUITY TEST
The electrical resistance between protective earthed metal parts and the ground mains connector pin is measured to be lower
than 0.1 Ohm. (Production tested)
IV.1.3
ELECTRIC STRENGHT
A voltage of 1000VAC is applied between earth and N + L, for 1 second and leakeage current is measured to be lower than
6mA. (Production tested)
IV.1.4
ABNORMAL OPERATION AND FAULT CONDITIONS
Secondary voltage power is distributed over fused outlets and thus limited in current and power.
The power supplies have current limiting features (hiccup mode).
In case of total malfuction the mains fuse will limit current and power drawn from the mains power.
V ANNEXES
V.1 ELECTRICAL RATING AND FUSING
refer to ‘BO_xtreme_fuses’ file
V.2 ELECTRICAL SCHEMATICS
refer to ‘BO_xtreme_1_wire_schematic’ file
V.3 COMPONENT DATASHEETS
Refer to ‘BO_xtreme_partslist’ file and datasheet in addendum (named with the art.nb.+ type) for details.
VI REVISION LOG :
Rev01 versus rev00 :
-
primary connection box and wire clamping in the bottom left
- Intelli supply module connected non-detachable
- fan is no longer placed
- new connection means to monitor in the back
- top lights power supply exchanged with lower power version
- fused secundary connections for RGB lights