ELAUT Big One X-treme, Руководство пользователя

Страница: 19 / 127

Building X-treme Big One
14 Document versie: V1.1
²
•
In each package of a “corner piece” you should find some extra packages with the RGB led
boards required to build 1 side.
•
Each package is marked with “Lower parts” or “Upper parts”.
•
We will start with the “lower parts”. These need to be fixed in each corner starting at the
bottom.
•
Connect the shortest datacable 9015.1257 to the white connector of RGB led board “A”.
•
Sequence of mounting the RGB led boards (see marking at the back of the led boards)
1x A (to start with at bottom).
9x B
•
The “PVC print montage” parts will be placed at the beginning and end of each completed RGB
led board strip. Also at each connection between 2 RGB led boards, a “PVC print Montage”
piece will be placed.
•
During the building of the bottom strip the data cable 9015.1258 (datacable for upper strips)
and datacable 9015.1259 (datacable for split connection) will be guided upwards. See also
some pictures on the following pages.
•
Check also the pictures at next page which show the assembly of the lower RGB led strip.