ELAUT Big One X-treme, Руководство пользователя

Страница: 35 / 127

Building X-treme Big One
30 Document versie: V1.1
²
•
We will first fix the wooden floorplate labelled “B5” at the back of the controls casing as shown
in picture below. The mounting holes in the wooden plate are already present. We only need
to drill holes of 3.6mm in the aluminium frame at these locations once the plate has been well
positioned (±100mm from the aluminium frame as shown in picture below).
•
The panels will be place in the following sequence: B1 > B2 > B3 > B4.
•
Each panel will be fixed against the each other but also against the aluminium frame.
•
To support the wooden panels in the middle of the frame we will support them with the
panels B7 where 2 panels B7 will be shifted into each other as shown below.
±100mm