ELABO 92-4A Скачать руководство пользователя страница 57

Страница: 57 / 87

Leakage current tester 92-4A / 92-4D / 92-2E

MAINTENANCE AND ATTENDANCE

Before starting with all maintenance and attendance work, the unit

has to be cut off from the power supply (pull out plug!) !

The unit is almost maintenance-free !

Attention:

The instrument is rather heavy (see Chap. 1 "Technical Main Data ").

Therefore suitable precautions must be taken to avoid accidents before

mounting or removing.

7.1

Exchange of fuses

In case of irregularities in the power supply system or improper strain on

the unit the current circuit is interrupted by a fuse. After the disturbance

the fuse has to be exchanged.
If it happens that a fuse brakes it may be exchanged only once. If the in-

terruption of the current circuit occurs once again after the fuse has been

exchanged, please send the unit to your next ELABO-service or contact

the ELABO-hot-line (+49 7951/307-202).

Use the indicated type of fuse exclusively!

Should you need spare parts (fuses, keys, code connectors,...) for your

tester contact your ELABO-service or the ELABO-hot-line (+49 7951/307-

202).
We are pleased to be of help.
The position and location of the fuses shows the illustration in table on

page 3/4 as well as the picture in the appendix.

7.2

Attendance of the chassis

For cleaning the cabinet just use a clean, dry and fluff-free cloth.

Do not clean the unit with cleaning agent or water at any time.

Содержание 92-4A
























































































Результаты поиска

Содержание 92-4A

Отзывы:

Похожие инструкции для 92-4A

Бренды по названию

Популярные бренды

ELABO 92-4A, Руководство по эксплуатации

Результаты поиска

Содержание 92-4A

Отзывы:

Похожие инструкции для 92-4A

Бренды по названию

Популярные бренды