ELABO 92-4A Скачать руководство пользователя страница 12

Страница: 12 / 87

Leakage current tester 92-4A / 92-4D / 92-2E

Safety Regulations

2.3

Use as per specifications and exclusion of liability

The leakage current tester has to be used as per the specifications only

for the intended tests. Every use beyond is considered as not according

to the specifications. ELABO does not accept any liability for damages

resulting from this, the operator exclusively carries the risk. It is also nec-

essary for the use as per the specifications that the information given in

these operating instructions is observed.
The device and its components have been developed and constructed for

the application in the industrial field. According to DIN EN 55022 ITE this

unit represents a system of the class A. Neither the leakage current tester

as a whole or the single components of it may be employed in another

environment. In case of non-observance of this information ELABO does

not accept any liability for appearing malfunctions and damages resulting

from this.
These operating instructions and all enclosures must have been attentive-

ly read and understood by all operators before working with the leakage

current tester. The leakage current tester has to be operated by trained

and skilled staff only.
The device may not be changed regarding construction and safety tech-

nology. Every alteration needs the express assent of ELABO.
Unauthorized modifications at the leakage current tester as well as the

use of spare parts, accessories and extra equipments which have not

been controlled and released by ELABO can have a negative influence

on the function and features of the leakage current tester. ELABO does

not accept any liability for damages resulting from this.
ELABO does not accept any liability for damages arising by non-ob-

servance of the operating instructions or by negligence of duty of care

during the transport, installation, handling, operation, attendance and

maintenance or during repair of the unit even if these duties of care are

not particularly pointed to in the operating instructions.

2.4

General rules of conduct and safety regulations

The leakage current tester was built according to the state of art and

approved safety regulations. Nevertheless, there might arise danger to

life of the operator or third persons respectively damages at the tester or

other material goods.

The leakage current tester has to be operated in workmanlike condition

only and according to the specifications under observance of the operating

instructions. Faults impairing the safety have to be cleared immediately.

The person responsible for the operation has to attend to that the staff

charged with work at the tester must have read and understood the oper-

ating instructions before commencement of work. The person responsible

for the tester operation is obliged to always operate the tester in perfect

condition only and to instruct the service staff to use the unit as per the

specifications.

Содержание 92-4A
























































































Результаты поиска

Содержание 92-4A

Отзывы:

Похожие инструкции для 92-4A

Бренды по названию

Популярные бренды

ELABO 92-4A, Руководство по эксплуатации

Результаты поиска

Содержание 92-4A

Отзывы:

Похожие инструкции для 92-4A

Бренды по названию

Популярные бренды