ELABO 92-4A Скачать руководство пользователя страница 14

Страница: 14 / 87

Leakage current tester 92-4A / 92-4D / 92-2E

Make ready

MAKE READY

3.1

Transport and installation

The device is delivered completely packed and may only be taken out off

the package directly at the operational place.

If an intermediate storage is necessary, a dry storage place must be

chosen.

The facility is protected against

unauthorized operation by a

key switch (S1) or by pass

word. ).

After unpacking, the keys have

to be immediately handed over

to the person responsible for

the operation and have to be

kept inaccessible for other em-

ployees by him.

Note:

The tester can be integrated into a suitable industrial rack with 19” inser-

tions. If this is not provided the operational area has to be plane and clean.

The tester has to be secured against

unintentional displacement

Attention:

The device is heavy (see cape. 1 „technical main data“). Therefore suitable

precautions must be taken to avoid accidents in front of the installation

or consolidation.

Prerequisite:

The operational surface has to be suited to the weight of the tester (see

chapt. 1 "Technical Main Data") and provide a safe support for the unit at

any time.
When installing the tester pay attention that the information and safety

signs at the instrument are not covered.

3.2

Environmental conditions

The Leakage current tester must not be operated in a dusty, inflammable,

aggressive or humid environment. The permissible values of temperature

and humidity are listed in chapter 1.4 ´Technical Main Data´.

3.3

Mounting in enclosure or rack

Note:

Push the device carefully into the rack until the stop. Do not tilt the

unit while pushing it in.
After pushing in the unit into the enclosure, the unit must be fastened by

4 screws, located on the front-panel.

Illustr. 3.1: Key (S1) of the tester

Содержание 92-4A
























































































Результаты поиска

Содержание 92-4A

Отзывы:

Похожие инструкции для 92-4A

Бренды по названию

Популярные бренды

ELABO 92-4A, Руководство по эксплуатации

Результаты поиска

Содержание 92-4A

Отзывы:

Похожие инструкции для 92-4A

Бренды по названию

Популярные бренды