EKOM DK50 4x2VT/M, Руководство пользователя

Страница: 39 / 60

OPERATION
04/2022 39 NP-DK50-Nx2VTM-AD-EN-6_04-2022
Alarm signals have priority over
maintenance interval signals.
As such, the light will indicate
an alarm from any of the air
pumps.
One the alarm is over, the
service interval is indicated by
the activated HA beacon.
17. SWITCHING OFF THE COMPRESSOR
Turn off the controller program for maintenance or other reasons that require the controller be shut
down.

Repeatedly press ▼ until the
display shows the current date and
time

Press ESC to show the following
menu:
Use Set.. to set the current time.

Press▲ or ▼ to move the “>” cursor
on the display to
Stop and press OK
to confirm.
Never press OK if the cursor “>”
is at Set Param! Switching to
this menu opens windows with
software
functional blocks.
Changes to the parameters in
these blocks have a direct
effect on the functionality of the
equipment!
You will be asked if you really want to quit
the program.

• Press▲ or ▼ to move the
“>” cursor on the display to
Yes and
press OK to confirm.
Now turn off circuit breakers FA13 and FA14.
Vent the air tanks by disconnecting from the central compressed air circuit and opening the
outlet valve (Fig. 1) or the drain valves