EKOM DK50 4x2VT/M, Руководство пользователя

Страница: 22 / 60

INSTALLATION
NP-DK50-Nx2VTM-AD-EN-6_04-2022 22 04/2022
INSTALLATION
Risk of incorrect installation.
Only a qualified technician may
install the compressor and
place it into operation for the
first time. Their duty is to train
operating personnel on the use
and
maintenance of the
equipment. An entry is made in
the
equipment installation
record to certify installation and
operator training. (see the
Annex chapter)
10. INSTALLATION CONDITIONS

The compressor may only be installed
and operating in dry, well-ventilated
and clean environments under the
conditions specified in the Technical
Data chapter.
Risk of damage to the device.
The equipment may not be
operated
outdoors or in
otherwise wet or damp
environments.
Risk of explosion.
Do not use the equipment in the
presence of explosive gases,
dust or combustible liquids.

The compressor must be installed so
that it is accessible at all times for
operating and maintenance. Please
ensure that the nameplate on the
device is readily accessible.

The compressor must stand on a flat,
sufficiently stable base (be aware of
the weight of the compressor, see the
Technical Data chapter).

The compressor on the operator’s side
must be at least 70 cm from the wall to
allow air flow for cooling purposes and
to ensure the safety of the operator
and maintenance personnel.

Approximately 70% of the electrical
energy used by the compressor
aggregates is converted to heat, and
therefore the rooms in which the
compressor is installed must have
additional
ventilation to provide
sufficient air exchange for cooling
purposes (see the Technical Data
chapter).
Burn or fire hazard! Caution!
Hot surface!
Portions of the compressor,
dryer and connecting hoses
between
the dryer and
compressor may be hot and
reach hazardous temperatures
during compressor operation
that may harm materials or
operating staff.
High temperature hazard
Placing air flow impediments
upstream or downstream of the
cooler
is prohibited. The
temperature of internal and
external parts of the equipment
may rise to hazardous levels.
Ensure the power cords and air
hoses are not damaged. The
power cord must not show
signs of stress and must be
kept without tension (placing
any objects on it is prohibited),
and subjecting the cord to
external heat in any form is
prohibited.