EKOM DK50 4x2VT/M, Руководство пользователя

Страница: 50 / 60

PRODUCT MAINTENANCE
NP-DK50-Nx2VTM-AD-EN-6_04-2022 50 04/2022
18.16. Replacement of the logic valve ball

Turn off the compressor.

Check the pressure in the dryer.

If the dryer chambers are under
pressure, proceed in accordance with
Chapter 18.13.

Unscrew the 4 screws (1) and remove
the cover (2).

Remove the ball cover (3).

Replace the ball (4).

Check the nozzles (5) and clean as
necessary.

Reverse the procedure to
reassemble.

Check for leaks and the operation of
the logic valve and nozzles
– check for
the cyclical switching of the chambers.
Fig. 29: Replacement of the logic vave ball
18.17.
Replacement of the dryer’s
silencer
Working with pressurised
pneumatic components poses a
risk of injury.
Operating the equipment
without silencers generates
high levels of noise. Only
replace silencers when the
equipment is shut down.

Unscrew the silencer (1).

Install a new silencer.
Fig. 30: Replacement of the silencer