EKOM DK50 4x2VT/M, Руководство пользователя

Страница: 23 / 60

INSTALLATION
04/2022 23 NP-DK50-Nx2VTM-AD-EN-6_04-2022
You may notice a “new
product” odour when you first
place the product into service
(for a short period of time). This
odour is temporary and does
not impede the normal use of
the product. Ensure the space
is properly ventilated after
installation.
Fig. 4: Equipment installation
11. COMPRESSOR ASSEMBLY
11.1. Handling and releasing the
compressor

Unpack the compressor (compressor
modules, dryer and air tank) from the
packaging and remove the transport
anchors from the pallet. All modules
are secured to pallets.

Use a fork lift or similar hoisting
equipment to handle and position the
product.

Position the compressor module at the
site of installation. (Fig. 5)
Air outlet
Space conditions
-
Tempe5°C ÷ +40°C
- Relative humidity 70%
Recommended flow
of cooling air:
DK50 6x2VT/M - 1500m
3
/h
DK50 4x2VT/M
– 1000m
3
/h
Applies for continuous
operation and cooling air
temperature of
20°C
Cooling air inlet