EKO PV Blocks MP-1000S, Инструкция по эксплуатации

Страница: 55 / 64

PV Blocks system Page 55
3.3. CONNECTING TEMPERATURE MEASUREMENT EQUIPMENT (PV-TEMP)
For measuring the temperature of the PV Modules, the MP-1000S system is equipped
with 8 PT100 sensors. Each PT100 sensor will be placed outside at the back of each PV
Module (by adhesive tape). The PT100 cables will be connected by a 10m cable to 2
PV-TEMP Blocks (nr. 5).
Connecting PT100 sensor 1 (temperature1)
•
Connect cable of PT100 sensor (temperature1) to connector (X, 1+, 1+, 1-) of PV-
TEMP 1
Connecting PT100 sensor 2 (temperature2)
•
Connect cable of PT100 sensor (temperature2) to connector (X, 2+, 2+, 2-) of PV-
TEMP 1
Connecting PT100 sensor 3 (temperature3)
•
Connect cable of PT100 sensor (temperature3) to connector (X, 3+, 3+, 3-) of PV-
TEMP 1
Connecting PT100 sensor 4 (temperature4)
•
Connect cable of PT100 sensor (temperature4) to connector (X, 4+, 4+, 4-) of PV-
TEMP 1