EKO PV Blocks MP-1000S, Инструкция по эксплуатации

Страница: 18 / 64

PV Blocks system Page 18
2. Back panel temperature sensors
The PT-100 cables have a label (1-8) and should be at-
tached to the PV module of the corresponding number of
the IV/MPP load.
The temperature sensor has a 3M double sided indus-
trial adhesive. Clean the backside of the PV module for
proper adhesion. The strain relieve can be attached in
close distance to the sensor head.
3. PVmet500
The PVmet500 meteorological station can be in-
stalled near to the PV evaluation system.
For proper wind measuerments keep the sensor at
a minimum hight of 2m above ground.
Connections:
Yellow A-
Orange B+
Red VDC+
Black VDC –
Green/yellow Ground