EKO PV Blocks MP-1000S, Инструкция по эксплуатации

Страница: 16 / 64

PV Blocks system Page 16
1.4. GETTING STARTED
In order to obtain high quality measurements several criteria with respect to set-up and mounting of the
instruments have to be considered.
The ideal mounting position for the system is a location which has a full hemispheric field-of-view without
any obstructions [such as buildings, trees, and mountains]; however, it might be difficult to find such loca-
tions. Therefore, in practice it is ideal to install in a position which is free from obstructions at 5° above
horizon.
The setup location should be easily accessible for periodic maintenance [glass dome cleaning], and avoid
surrounding towers, poles, walls or billboards with bright colors that can reflect solar radiation onto the PV
system.
The All-weather IP54 PV blocks system can be installed in close range to the PV modules. The Load units
can be directly connected to the PV module.
Install the IV/MPP load units on a metal frame not exposed to precipitation and direct sun
light. The loads unit are IP54 protected, however it is strongly recommended to shelter
from environmental factors.
During installation and service make sure mains power is switched off.