Ekinex EK-BN1-TP, Руководство по настройке

Страница: 11 / 23

Gateway configuration manual
Profinet Slave/KNX TP – EK-BN1-TP
Revision 1.0.2 - Update: 10/12/2018 Configuration manual
© EKINEX S.p.A. – All rights reserved Page 11
5 Configuration software
The ekinex® configuration software CGEKBN1TP allows you to perform the following operations:

Selection of physical address of the device over the KNX TP network;

Selection of Ethernet parameters;

KNX network: communication objects definition and relative group addresses to be acquired;

KNX network: communication objects definition and relative group addresses to be sent over the KNX
network;

Profinet network: creation of GSD file to import in master’s configuration

Firmware and/or configuration update.
The application program consists in multiple modal windows called “forms”: each form must be closed before
accessing the following form. The buttons on the main form (see Figure 2 – Main form of the application
program) are ordered according to the proper sequence to follow in order to perform a correct configuration.
Figure 2 – Main form of the application program
Starting from the main form, by accessing the
About... window, you can check the current version of the
installed program.
Figure 3 – About form
Please visit the section about communication gateways on www.ekinex.com in order to
check the current version of the application program and download the latest version.
i