Gateway configuration manual
Profinet Slave/KNX TP – EK-BN1-TP
Revision 1.0.2 - Update: 10/12/2018
Configuration manual
© EKINEX S.p.A. – All rights reserved
Page 5
1.3 Supply
The supply includes the device and terminal blocks to connect to the KNX bus. An instruction sheet is also
supplied within the package.
1.4 System requirements for configuration software
Configuration and commissioning of the ekinex® gateway must be performed using the application program
CGEKBN1TP, available for download at
The PC where the application program is installed must meet the following requirements:
•
Desktop o laptop PC with Ethernet IEEE 802.3 port.
•
32/64 bit operating system, Microsoft Windows® XP, 7, 8.0, 8.1 e 10.
.NET Framework 4.0 system library installation is required.
1.5 Certifications
Compliance with the European directives is certified by the CE symbol on the product label and on the
documentation.
i
