Gateway configuration manual
Profinet Slave/KNX TP – EK-BN1-TP
Revision 1.0.2 - Update: 10/12/2018
Configuration manual
© EKINEX S.p.A. – All rights reserved
Page 6
2 Switching, display and connection elements
The device is equipped with a pushbutton and a KNX programming LED, with a status LED and terminal
blocks for KNX network connection. A port for RJ45 connector for Profinet network connection and device
configuration via Ethernet as well as one 1-way microswitches are also present.
Figure 1 - Switching, display and connection elements
1)
KNX bus line terminal blocks
2)
KNX programming pushbutton
3)
KNX programming LED
4)
Power supply terminal blocks
5)
1-way microswitch A
6)
Ethernet port
7)
Ethernet port LED
8)
Device satus LED
9)
Profinet communication LED
10) KNX communication LED
11) Device error LED
ON
1 2
8...24 Vac
+V
0V
POWER S.
12...35 Vdc
ETHERNET
Dev.
Line
Area
KNX
PROFINET
Device state
EK-BN1-TP
PROFINET
/ KNX TP Converter
Failure
1
2
5
4
6
7
8
9
10
11
3
