Eizo gs521-bl, Руководство пользователя

Страница: 14 / 41

14
Chapter 3 Setting Monitor
●
DisplayPort Connection
Procedure
1. Press to turn off the monitor.
2. Press holding down for at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
3. Choose <Signal Selection> from the <Optional Settings> menu, and press .
4. Select “DistplayPort” with or , and press .
5. Select “Sub Pixel Drive”, and press .
6. Select “On” or “Off” with or , and press .
7. Press twice, and use or to select "Finish" from the <Optional Settings> menu.
8. Press to exit.
The Optional Settings menu is closed.
3-3. Enabling/Disabling Mode Selection [Mode Preset]
Allows you to select the specified modes only.
Use this function when all the display modes are not available or when keeping the display mode
unchanged.
Procedure
1. Choose <Tools> from the Adjustment menu, and press .
2. Choose <Mode Preset> from the <Tools> menu, and press .
3. Select the mode to change its settings with or , and press .
4. Select “On” or “Off” with or .
5. Press to exit the adjustment.
Attention
• You cannot set all the modes disable. Set at least one mode to “On”.
3-4. Locking Switches [Key Lock]
This function allows you to lock to prevent changing the adjusted/set status.
Procedure
1. Press to turn off the monitor.
2. Press holding down for at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
3. Choose <Key Lock> from the <Optional Settings> menu, and press .
4. Select “Off”, “Menu”, or “All” with or , and press .
Settings Switches that can be locked
Off
(Initial settings)
None (All switches are enabled)
Menu
switch
switch
All
All switchs excluding
5. Select “Finish” with or .
6. Press to exit.
The Optional Settings menu is closed.