34
Chapter 4 Using Smart Function
To set “Smart Detection”
Setting
Function
Video
Detects the animated images on the screen, and applies the setting only to the
detected area.
Full Screen
Applies the setting to the whole screen.
Procedure
1.
Press
on the remote control.
The “Smart Functions” menu appears.
2.
Select “Smart Detection”, and press
.
The “Smart Detection” menu appears.
3. Select “Video” or “Full Screen” with
or
.
4.
Press
to exit.
Note
•
Under the following conditions, the setting for “Smart Detection” is fixed to “Full Screen”.
-
At analog signal input
-
At interlace signal input
• “Full Screen” should be set to display animated images using the whole screen.
To set “Smart Resolution”
Adjustable range
1 - 5, Off
Procedure
1.
Press
on the remote control.
The “Smart Functions” menu appears.
2.
Select “Smart Resolution” with , and press
.
The “Smart Resolution” menu appears.
3.
Set the correction level with
or
.
4. To complete the setting, proceed to step 7.
To continuously set “Skin Tone Enhancer” and “Text Enhancer”, proceed to step 5.
5.
Choose the item to correct, and press
.
Each setting menu appears.
6. Select “Enable” or “Disable” with
or
.
7.
Press
to exit.
Attention
•
When “Smart Resolution” is set to “Off”, “Skin Tone Enhancer” and “Text Enhancer” cannot be selected.
•
“Text Enhancer” is enabled only when all the conditions below are met.
-
At digital signal input
-
At non-interlace signal input
-
The screen is not enlarged using the Screen Size function (see
“2-5. Screen Size Changing” (page 26)
).
