●
Preferences
The monitor's settings can be configured to suit the usage environment or personal preference.
Function
Settings
Description
USB CHARGE
Port
Normal
Charging Only
The USB downstream
port of the monitor supports
USB 3.1 Gen 1 quick charging. By changing this setting to
"Charging Only", devices connected to the
port can be
charged more quickly than when using the "Normal" setting.
Note
•
Make sure to complete any communication between connected
USB devices and the PC before switching this setting. When
the setting is switched, all communication will be temporarily
interrupted.
•
Devices that are connected to the
port must support
quick charging.
•
When "Charging Only" is set, data communications between
the PC and connected devices via the
port are not
possible, and therefore, connected devices will not work.
•
When "Charging Only" is set, charging is possible even
when the monitor and PC are not connected by USB cable.
Power Save
On
Off
This function allows you to set the monitor to the power saving
mode, depending on the state of an external device connected
to it.
The monitor changes to power saving mode about 15 seconds
after signal input ceases to be detected. When the monitor has
shifted to power saving mode, images are not displayed on the
screen.
•
Exiting power saving mode
- If the monitor receives input, it automatically exits power
saving mode and returns to the normal display mode.
Note
•
At the time of shifting to power saving mode, a message that
indicates the transition is displayed 5 seconds in advance.
•
When you are not using the monitor, turn off the main power
switch to cut down on power consumption.
•
When the monitor is in power saving mode, devices
connected to the USB downstream port will still work.
Therefore, power consumption of the monitor varies
depending on the connected devices, even in the power
saving mode.
31
Chapter 3 Advanced Adjustments/Settings
