Function
Settings
Description
Ta
rge
t Se
ttin
gs
Color Gamut
Native
Adobe
®
RGB
sRGB
EBU
BT.709
BT.2020
SMPTE-C
DCI-P3
User
Set the color gamut that will be used as a calibration target for
SelfCalibration.
In "Color Gamut", the color gamut defined by each standard
can be selected.
To set a color gamut other than those specified by each
standard, specify the color coordinates of each RGB color, and
the display method ("Gamut Clipping") of colors outside the
color gamut of the monitor.
Note
•
When you select "Native" in "Color Gamut", the preset color
gamut of the LCD panel is displayed.
•
When color coordinates are specified in the color gamut
settings, the color gamut is changed to "User".
Red(x) /
Red(y) /
Green(x) /
Green(y) /
Blue(x) /
Blue(y)
0.0000 to
1.0000
Gamut Clipping
On
Off
Advanced
Settings
Limited
(109% White)
On
Off
Set whether the brightness range of the input signal is extended
from 16 - 254 (10 bits: 64 - 1019) to 0 - 255 (10 bits: 0 - 1023) for
display.
Note
•
This can be set when "1.0 to 2.7" is specified for "Gamma
(EOTF)".
Reset
-
Resets any calibration targets for the currently selected color
mode back to the default settings.
●
SelfCalibration
Refer to
“4-1. SelfCalibration functions” (page 36)
26
Chapter 3 Advanced Adjustments/Settings
