Function
Settings
Description
Input Color Format Auto
YUV 4:2:2
*1
YUV 4:4:4
*1
YUV
*2
RGB
*1 *2
YCC4:2:2 10bit
*3
YCC4:2:2 12bit
*3
YCC4:4:4 10bit
*3
YCC4:4:4 12bit
*3
RGB4:4:4 10bit
*3
RGB4:4:4 12bit
*3
The color space of the input signal can be specified.
Try changing this setting if colors are not displayed correctly.
Normally, select "Auto". When an SDI signal is input, the bit
depth is specified using the Input Color Format. If the specified
bit depth is invalid, a signal error is displayed.
*1 Only enabled during HDMI input
*2 Only enabled during DisplayPort input
*3 Only enabled during SDI input. To apply the settings to the input signal, you must press the dial to confirm
the settings.
Function
Settings
Description
YUV Color Matrix
Auto
BT.601
BT.709
BT.2020
Select the YUV format of the input signal. Use this setting for
gradation collapse or other occurrences where the screen is
displayed incorrectly because of a problem with the input signal.
Input Range
Auto
Full
Limited (109%
White)
Limited
SDI Full
Depending on the external device, the black and white levels in the
video signal output to the monitor may be restricted. If the signal
is displayed on the monitor in its restricted form, the blacks will be
faint, the whites dull, and contrast will be reduced. The brightness
range of such signals can be extended to match the actual contrast
ratio of the monitor.
•
"Auto"
The monitor automatically recognizes the brightness range of
input signals and displays images appropriately.
•
"Full"
The input signal brightness range is not extended.
•
"Limited (109% White)"
The brightness range of the input signal is extended from 16 -
254 (10 bits: 64 - 1019) to 0 - 255 (10 bits: 0 - 1023) for display.
• "Limited"
The brightness range of the input signal is extended from 16 -
235 (10 bits: 64 - 940) to 0 - 255 (10 bits: 0 - 1023) for display.
•
"SDI Full"
The brightness range of the input signal is extended from 1 - 254
(10 bits: 4 - 1019) to 0 - 255 (10 bits: 0 - 1023) for display.
Black Level Lift
-500 to 500
The black video level is changed without changing the white video
level of the input signal.
Deinterlacing
Normal
Line Doubler
Select the IP conversion format. Normally, it is not necessary to
change this setting from "Normal".
18
Chapter 3 Advanced Adjustments/Settings
