GB
- 22 -
Protection from environmental in
fl
uences
1. Wear suitable work clothes. Wear safety gog-
gles.
2.
Protect your cordless tool and the battery
charger from moisture and rain.
Moisture
and rain can cause dangerous cell damage.
3. Do not use the cordless tool or the battery
charger near vapors and in
fl
ammable liquids.
4. Use the battery charger and cordless tools
only in dry conditions and an ambient tempe-
rature of 10-40°C.
5. Do not keep the battery charger in places
where the temperature is liable to reach over
40°C. In particular, do not leave the battery
charger in a car that is parked in the sunshine.
6.
Protect batteries from overheating.
Over-
loads, over-charging and exposure to direct
sunlight will result in overheating and cell
damage. Never charge or work with batteries
which have been overheated – replace them
immediately if possible.
7.
Storage of batteries, battery chargers
and cordless tools.
Store the charger and
your cordless tool only in dry places with an
ambient temperature of 10-40°C. Store your
lithium-ion battery pack in a cool, dry place at
a temperature of 10-20°C. Protect them from
humidity and direct sunlight. Only place fully
charged batteries in storage (charged at least
40%).
8. Prevent the lithium-ion battery pack from free-
zing. Battery packs which were stored below
0°C for more than 60 minutes must be dispo-
sed of.
9. When handling batteries beware of electro-
static charge: Electrostatic discharges cause
damage of the electronic protection system
and the battery cells. Avoid electrostatic char-
ging and never touch the battery poles.
Rechargeable batteries and cordless electric
machines and tools contain materials that are po-
tentially harmful to the environment.
Safety Information for all Applications
a) This electric tool is designed for
use as a grinder/sander and cutting-o
ff
machine. Obey all the safety instructions,
general instructions, illustrations and
data supplied with the tool.
If you fail to
obey the following instructions, you may
su
ff
er an electric shock,
fi
re and/or serious
injuries.
b) This electric tool is not designed for
sanding, working with wire brushes or
polishing.
Use of the electric tool in ways it
was not intended could lead to dangerous
situations and injuries.
c) Do not use any accessories which have
not been designed and recommended
by the manufacturer speci
fi
cally for this
electric tool.
Just because you can attach an
accessory to your electric tool, this does not
guarantee that you can use it safely.
d) The maximum speed of the plug-in tool
must be at least as high as the maximum
speed speci
fi
ed on the electric tool.
Ac-
cessories which rotate faster than the maxi-
mum speed may break and be catapulted out
of the tool.
e) The external diameter and thickness of
the plug-in tool must comply with the
dimension speci
fi
cations of your electric
tool.
Plug-in tools of the wrong size cannot
be adequately screened or checked.
f) Plug-in tools with thread must
fi
t exactly
on the thread of the grinding spindle. In
the case of plug-in tools that are
fl
ange-
fi
tted, the hole diameter of the plug-in
tool must
fi
t the mounting diameter of the
fl
ange.
Plug-in tools that are not exactly se-
cured to the electric tool will rotate irregularly,
vibrate a great deal and might result in you
losing control.
g) Do not use damaged plug-in tools. Before
use, check plug-in tools such as
grinding/sanding wheels for splintering
and cracks, grinding/sanding disks for
cracks, wear or heavy wear, and wire bru-
shes for loose or broken wires. If the elec-
tric tool or the plug-in tool is dropped,
check whether it is damaged or use an
undamaged plug-in tool. When you have
checked and
fi
tted the plug-in tool, make
sure that you and other persons in the
vicinity are not on a level with the rotating
plug-in tool and allow the electric tool to
run for one minute at maximum speed.
Damaged plug-in tools will generally
Anl_SA_Axxio_SPK8_EX_ARG.indb 22
Anl_SA_Axxio_SPK8_EX_ARG.indb 22
04.06.2018 12:56:47
04.06.2018 12:56:47
