Eighteeth E-connect S, Руководство пользователя

Страница: 21 / 47

6 Setting
R settings estore
OFF
Press S again, entry “Restore setting” function,
press < or > to select “ON”, press
●
to start
recovering, all the parameters be set by operator will be
recovered by default factory setting
(See chapter 6.5
Parameter logic).
NOTE
After restore setting, all the parameters will be covered,
record what you need before this operation.
6.5 Parameter logic
The default memory settings are listed below, the setting can be changed as
needed.
Function
M1 M2 M3 M4 M5 M6 M7 M8 M9 M10
Operation
Mode
FWD FWD REC REC ATC ATC
REV REV
FWD FWD
Speed
(rpm)
300 400 350 450 450 300 350 500 800
1000
Torque Limit
(N·cm)
3.0 2.0 N/A N/A 1.5 1.5 2.5 2.0 1.5 1.0
Auto
Start
ON ON ON ON ON ON ON ON ON ON
Auto
Stop
OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
Apical
Action
REV REV REV REV REV REV REV REV REV REV
Reference
point
02 02 02 02 02 02 02 02 02 02
FWD
Angle
N/A N/A 30 40 370 210 N/A N/A N/A N/A
REV
Angle
N/A N/A 150 160 50 50 N/A N/A N/A N/A
Page 21 / 47