EHRLE HS 1040 Series, Руководство по эксплуатации

Страница: 44 / 117

Hochdruck-Reinigungs-Systeme High-Pressure-Systems
107
below. If a check fails, the oil burner has to be adjusted by specially trained
and quali ed personal.
Speci cation for the oil burner check and adjustment
Type of fuel Heating oil EL (or Diesel)
Fuel oil nozzle 1.35 gph 60° S
Fuel pressure 11 - 12 bar
Burner air squeezing medium air squeezing
Allowed exhaust values
Exhaust temperature 200 - 240 °K
Carbon dioxide 11.0 - 12.0 CO2 in %
Carbon monoxide 80 - 120 ppm
Soot number 0 - 1 according to Bacharach
Exhaust power loss 8 - 11 %
2.3.3 Gas burner check and adjustment for series HSG
To ensure the operating safety of the High Pressure Cleaner, use
only gas type noted on the type plate of the gas burner.
Otherwise injury to persons may result.
The scope of delivery of the series HSG includes the “Installation
and Operating Instructions” from the gas burner manufacturer
(original equipment manufacturer). Observe the “Installation and
Operating Instructions” for the gas burner.
Only specially trained and quali ed personal are allowed to check
and adjust the gas burner.
There are two different gas burner versions using natural gas or
LPG. Observe note on the type plate of the gas burner.
Check the exhaust at the adjustable chimney (21, gure 1) for the values listed
below. If a check fails, the gas burner has to be adjusted by specially trained
and quali ed personal.
WARNING
ATTENTION