EHRLE HS 1040 Series, Руководство по эксплуатации

Страница: 28 / 117

Hochdruck-Reinigungs-Systeme High-Pressure-Systems
91
2.2.2 Locating the High Pressure Cleaner central unit
Install the central unit of the EHRLE High Pressure Cleaner series HS, HSE
and HSG in a protected, dry atmosphere and easily accessible for mainte-
nance and service. The central unit is intended for dry environment only, do
not splash or wash down. The environmental temperature must not exceed
40°C.
At the High Pressure Cleaner location a water discharge should be provided.
For the operation of oil or gas red high pressure cleaners in enclosed rooms
ensure suf cient fresh air circulation and properly vented exhaust (e.g. chim-
ney).
Install the High Pressure Cleaner components at locations, which are easy
accessible for maintenance and service activities. Consider the dimensions for
installing the High Pressure Cleaner central unit on a oor mounting device
shown in the following two gures.
The central unit may also be installed with the wall mounting
device on a sturdy concrete wall.
NOTE