Egnite Querx TH Скачать руководство пользователя страница 5

Страница: 5 / 52

1 Introduction

Querx TH is a networking enabled measuring unit for
collecting temperature and humidity values.

This manual contains the basic information needed for
setting up, operating and maintaining Querx TH.

Up-to-date and in-depth information on Querx TH can be
found on the websites

http://www.egnite.de

and

http://sensors.egnite.de

1.1 Safety instructions

Please read this manual carefully and obey the following
safety instructions to minimize risks of injury and damage.

Querx TH is used for stationary measurement and
processing of temperature and humidity data, as well as for
providing this data over several interfaces.

All other use is regarded as not according to the intended
purpose. egnite can not be held responsible for
consequences from unintended use.

To avoid accidents caused by electrical current, please obey
the following instructions:



Only use device, cable and adapter in proper condition.



Disconnect power supply during maintenance.



Do not manipulate the device or its accessories.



Repairs are only to be done by trained staff.



Don't submerge the device in water or other liquids.

Introduction

Intended purpose

Querx TH online

Danger of death caused
by electrical shocks

Содержание Querx TH





















































Результаты поиска

Содержание Querx TH

Отзывы:

Похожие инструкции для Querx TH

Бренды по названию

Популярные бренды

Egnite Querx TH, Руководство пользователя

Результаты поиска

Содержание Querx TH

Отзывы:

Похожие инструкции для Querx TH

Бренды по названию

Популярные бренды