4 Configuration
4.1 Basic configuration
For proper operation, the following configuration steps need
to be carried out.
4.1.1 Assign system name
On the homepage of the configuration interface, which can
also be accessed via
System / General
, enter a system name
for the device. This name is used to identify the unit and for
addressing it in your network.
1.
Enter the system name in
System name
.
2.
If you want to use SNMP, enter a responsible member of
staff in
Contact person
and the location of the device in
System location
.
3.
Click on
Save
to apply your changes.
4.1.2 Configuration of the temperature unit
1.
In the configuration interface, click on
Sensors /
Temperature.
2.
Choose the physical temperature unit for Querx TH to
work with from the field
Unit
.
3.
Click on
Save
to apply your changes.
Configuration
10
