Some hands-on examples on how to use Querx TH with
SNMP can be found on the product's website at
5.5.1 General settings
1.
In the configuration interface, open the page
System /
General.
2.
Enter a
System name
to identify the device over SNMP.
Please keep in mind, that this name is also part of the
host name, over which Querx TH can be addressed in the
network.
3.
In the field
Contact person
provide a responsible member
of staff.
4.
Enter a
System location
for Querx TH.
5.
Click on
Save
to apply your changes.
5.5.2 Activate SNMP Agent
1.
In the configuration interface, open the page
Interfaces /
SNMP.
2.
In the section
SNMP agent
, tick the check box
Enable
, to
active the SNMP agent.
3.
Check the
Read community
and adjust it, if needed.
4.
Click on
Save
to apply your changes.
5.5.3 Activate SNMP traps
1.
In the configuration interface, open the page
Interfaces /
SNMP.
2.
In the section
SNMP traps
, provide the host that will
receive traps sent by Querx TH at
Trap destination.
3.
Check the
Trap Community
and adjust it, if needed
.
4.
Select the events on which a SNMP trap should be send at
Send trap on.
Data access and configuration of interfaces
31
