Egholm City Ranger 3070 Скачать руководство пользователя

Страница: 26 / 76

Operator’s Manual City Ranger 3070

1.7 Alarm lights and monitoring indicators - continued

Warning and signal lights

The machine features 14 warning and signal lights. Their meaning and purpose are described in this

section. Note any warning or signal light must not be ignored.

Attention

In case of engine overheating or of hydraulic overheating, contact your after-sales

service. Do not open the radiator cap when the liquid is under pressure. There is a risk of

accidents.

1. Left direction indication

Appears when the indicator arm points to the left or if the hazard switch is on.

2. Hazard light

Flashes when the hazard button is on along with the right and left indication arrows (1 and 3).

3. Right direction

Appears when the indicator arm points to the right or if the hazard switch is on.

4. Amber warning light

This signal lamp turns on when the engine control unit detects an error. Working must be

interrupted immediately and the machine driven to an authorized repair shop. When the amber

warning light is turned on, you will hear 1 second beep.

General information

Содержание City Ranger 3070













































































Результаты поиска

Содержание City Ranger 3070

Отзывы:

Похожие инструкции для City Ranger 3070

Бренды по названию

Популярные бренды

Egholm City Ranger 3070, Руководство оператора

Результаты поиска

Содержание City Ranger 3070

Отзывы:

Похожие инструкции для City Ranger 3070

Бренды по названию

Популярные бренды