Egholm City Ranger 3070 Скачать руководство пользователя страница 2

Страница: 2 / 76

Operator’s Manual City Ranger 3070

Dear Customer

Congratulations with your Egholm product. The City Ranger 3070 offers a very flexible way of

maintaining areas.

Optimal use of your City Ranger 3070

To ensure optimal performance of your City Ranger 3070, please read this manual carefully before

using the machine. Failure to do so can result in personal injury and damage to the machine.

Safety

The City Ranger 3070 is equipped with various devices to ensure optimal operational safety both for

the user and their surroundings. We ask you to pay particular attention to

section 1.1 Safety. The machine must only be driven by professionals in possession of driving

license type B.

The City Ranger 3070 is designed only for use by professionals. On delivery, the user will

receive thorough training to become a competent operator. Do not lend it to anyone who

has not been thoroughly trained and who has not read this manual carefully. The operator’s manual

should be considered a permanent part of the machine and must remain with the machine if sold.

Warnings

Some items in this operator’s manual are marked with this warning symbol, see figure 1.

The warning indicates areas where extra care has to be taken to avoid personal injury or

damage to the machine and its accessories. The warning also shows what you should pay

special attention to.

Reservations

As it is the Egholm´s policy to make continuous improvements, we reserve the right to alter the

specifications and equipment at any time without notice. Egholm accepts no liability for errors or

omissions in the operator’s manual.

Contact us

Should you have questions of any kind regarding your Egholm product, please do not hesitate to

contact Egholm.

Best regards

Egholm A/S

Transportvej 27 · DK-7620 Lemvig

Tel.: +45 97 81 12 05

www.egholm.eu - [email protected]

Introduction

Содержание City Ranger 3070













































































Результаты поиска

Содержание City Ranger 3070

Отзывы:

Похожие инструкции для City Ranger 3070

Бренды по названию

Популярные бренды

Egholm City Ranger 3070, Руководство оператора

Результаты поиска

Содержание City Ranger 3070

Отзывы:

Похожие инструкции для City Ranger 3070

Бренды по названию

Популярные бренды