Egholm City Ranger 2260 Скачать руководство пользователя страница 5

Страница: 5 / 72

Operator’s Manual City Ranger 2260

Introduction

The utility machine City Ranger 2260

The City Ranger 2260 is an outdoor utility machine with a complete range of special attachments

that allows you to work outdoors, all year round. Sweeping and vacuuming in spring and autumn,

mowing grass and lawn-edge cutting in the summer, sweeping snow, and spreading gravel and

sand in the winter. The City Ranger 2260 is market tested, effective and professional. Designed for

versatility, this user-friendly machine is extremely reliable and exceedingly comfortable to operate.

Quick-shift of attachments

Attachments can be changed quickly and easily. The new attachment system has a single lock and

release lever. Use the lever – one click and the attachment is on in less than a minute. Hoses and

couplings are hidden (thus well-protected) and the hydraulics and water supply, power and vacuum

hoses connect automatically.

Maintenance

Open a single side cover to check the water, oil, air filter and battery. No need to remove

attachments.

Environment

The City Ranger 2260 is environmentally sound – today and tomorrow. Quiet when operating and

practically vibration-free. The machine can use biological hydraulic oil and is far less harmful to the

environment than the minimum levels set by the EU.

Comfort

The City Ranger 2260 is an ergonomically-designed outdoor utility machine. The cab is spacious,

with good visibility on all sides, and the entry-opening is low and wide. The wheel and seat are

fully-adjustable to suit the operator. The seat has suspension (with optional pneumatic suspension)

and is very comfortable. All the operating controls – including the joystick for controlling the

attachments – are positioned optimally for the operator. Optional air conditioning.

Publication

This manual is made in accordance with the requirements in standard ISO 3600:1996.

To order this manual please refer to this item number E50006724. This manual applies only to the

Egholm City Ranger 2260.

Содержание City Ranger 2260









































































Результаты поиска

Содержание City Ranger 2260

Отзывы:

Бренды по названию

Популярные бренды

Egholm City Ranger 2260, Руководство оператора

Результаты поиска

Содержание City Ranger 2260

Отзывы:

Бренды по названию

Популярные бренды