Egholm City Ranger 2260, Руководство оператора

Страница: 37 / 72

37
1
2
3
5
4
Operator’s Manual City Ranger 2260 Operator’s Manual City Ranger 2260
General information
1.22 Fitting the cab/roll bar
- continued
6. Insert the cable into position. (Picture 1)
7. Tilt the cab/roll bar back into position.
8. Re-insert the four bolts behind the driver’s
seat and tighten. Due to tolerances, it may be
necessary to guide the holes into the correct
position (remember seat belt and lock).
(Picture 2)
9. Connect the three connectors on the cables.
(Picture 3)
10. Fit the filter and grate.
11. Attach the two rubber strips between the
base plate and cab frame (cab only). (Picture 4)
12. Attach the doors to the cab (cab only).
13. If roll bar mounted, remember to fasten
topframe of the roll bar. (Picture 5)
Insert the cables
Fit bolts
3 connectors behind grate
Rubber strips
Roll bar