Egholm City Ranger 2260 Скачать руководство пользователя страница 2

Страница: 2 / 72

Operator’s Manual City Ranger 2260

Introduction

Dear Customer

Congratulations with your Egholm product

The City Ranger 2260 is a Danish designed and manufactured product which offers a very flexible

way of maintaining outdoor areas.

Optimal use of your Egholm utility machine

To ensure optimal performance of your Egholm utility machine, please read this manual carefully

before using the machine. Failure to do so can result in personal injury and damage to the machine.

Safety

The utility machine is equipped with various devices to ensure optimal operational safety both for

the user and the surroundings. We ask you to pay particular attention to section 1.1 Safety. The

machine must only be serviced by professionals.

The City Ranger 2260 is designed only for use by professionals. On delivery, the user will receive

thorough training to become a competent operator.

Do not lend the machine to anyone who has not been thoroughly trained and has not read this

manual carefully.

The operator’s manual should be considered as a permanent part of the machine and so must

remain with the machine if it is sold.

Warnings

Some items in this operator’s manual are marked with this warning symbol.

The warning indicates areas where extra care has to be taken to avoid personal injury or

damage to the machine and its accessories. The warning also shows what you should

pay special attention to.

Reservations

As it is the Egholm policy to make continuous improvements, we reserve the right to alter the

specifications and equipment at any time without notice. Egholm accepts no liability for errors or

omissions in the operator’s manual.

Contact us

Should you have any questions regarding your Egholm product, do not hesitate to contact Egholm.

Best regards

Egholm A/S · Transportvej 27 · DK-7620 Lemvig

T. +45 97 81 12 05 · F. +45 97 81 12 10

E-mail: [email protected] · www.egholm.eu

Содержание City Ranger 2260









































































Результаты поиска

Содержание City Ranger 2260

Отзывы:

Бренды по названию

Популярные бренды

Egholm City Ranger 2260, Руководство оператора

Результаты поиска

Содержание City Ranger 2260

Отзывы:

Бренды по названию

Популярные бренды