Egholm City Ranger 2260, Руководство оператора

Страница: 44 / 72

44
1
2
3
Operator’s Manual City Ranger 2260 Operator’s Manual City Ranger 2260
Transport lock Parking lock
Brake pedal Drive pedal
Joystick
Operator’s manual
2.2 Start, drive and stop
- continued
Turning off the City Ranger 2260
1. The PTO front and PTO rear contacts must be
disengaged.
2. Pull the throttle back so the engine is idling.
3. Push the brake pedal down (Picture 1), lift the
parking lock up (Picture 2) and release the brake
pedal (See Section 1.6).
4. Turn off the City Ranger 2260 by turning the
key back to the key-release position.
Operating with front attachments
Before the City Ranger 2260 can drive, the fitted
attachments must be lifted clear of the ground.
Pull the joystick back until the attachment is
lifted all the way. (Picture 3)
If longer transport distances are involved, the
transport lock must be activated
(See Section 1.6).
Fitting attachments on the front and back
Read the operator’s manual for the relevant
attachment(s).
Connecting and disconnecting attachments
The engine must always be turned off before the
attachment is connected/disconnected.
The quick-shift of attachments is not designed
to be attached while the engine is running.
Incorrect usage will destroy the couplings and
will not be covered by the warranty.
The couplings and the area around the
couplings must be kept clean to avoid an
accumulation of dirt. (See section 3.1)