Egholm City Ranger 2260, Руководство оператора

Страница: 40 / 72

40
1
2
3
4
Operator’s Manual City Ranger 2260 Operator’s Manual City Ranger 2260
Operator’s manual
2.1 Daily checks before start-up
Open left rear screen
1. Put the release key into the slot. Put light
pressure on the side screen and on the release
key at the same time. (Picture 1)
2. Open the screen all the way or remove the
screen.
Special attention must be given to the
following checks
Engine oil
Remove dipstick. (Picture 2)
The oil level must be between the two lines on
the dipstick. (Picture 3)
Hydraulic oil
When the machine is switched on, the hydraulic
oil lamp must not light, see section 9, page 14. If
the lamp lights, the hydraulic oil level is too low,
topp up with hydraulic oil. The hydraulic oil level
can also be checked visually on the sight glass
of the hydraulic tank (Picture 4). Must be visible
in the sight glass. (Picture 4)
Topping-up – see maintenance section 3.4.
Light pressure on release
key and side screen
Hydraulic oil – sight glass
Engine oil – dipstick
Min. Max.
Engine oil
Release key