EFORT Intelligent Equipment Co., Ltd
6
Save completed programs to prevent accidental editing.
Confirm the program number and procedure number in teaching before operation.
Editing programs and procedures incorrectly could cause accidents.
When it is not necessary to make robot
’
s movement and operate it, please cut off
the power before proceeding.
When teaching is completed, check robot
’
s movement manually in low-speed state.
If it is operated with 100% full speed in automatic mode, accidents may occur due
to program errors.
Cleaning should be done and tools must be confirmed to be taken away after
teaching is completed. Oil contamination in the work area and forgetting tools may
cause accidents, such as falls.
Ensuring safety start with tiding up.
1.2 Instructions of Labels on Robot Body
Safety labels are affixed on specific parts of the robot to warn users of safety precautions in operating
and maintaining it.
Label
Name
Description
Attached Part
Be careful
not to
clamp
hands
The movable parts of the
robot may clamp your
hands.
It is generally pasted on
the rotating joint of the
power arm and the
connecting rod.
Caution,
hot
Robot operation causes
heat on some parts.
It is generally pasted on
the motor to suggest hot
motor and no touching
with bare hands.
