Configure PrintMe cloud printing
You must set up the E300 through Configure to enable PrintMe cloud printing.
1
In Configure, as Administrator, click
Job Submission
>
PrintMe
and then select
Enable PrintMe
.
2
Optional: If you need PrintMe cloud printing to connect to the E300 through a proxy server, click the
Manage
link next to
Proxy Settings
.
a)
In the
Proxy
dialog box, enter the required information about the proxy server.
3
Click
Save
.
Job mismatch settings
This section provides some examples of the expected behavior of various combinations of the job mismatch settings.
The mismatch settings are available in Configure, under
Job Management
>
Job Mismatch
. For more information
about the mismatch function, see
Command WorkStation Help
.
Workflow example 1
Assumptions:
•
Enable Job Mismatch
is
On
.
•
Mismatch Action
is set to
Cancel
.
•
Timeout
is set to
5 minutes
.
If a mismatch job occurs, the following happens:
1
An error message about the mismatch appears in Command WorkStation.
2
You have the timeout period (default is 5 minutes) to correct the mismatch, for example, by loading the correct
size of paper.
3
If no action is taken, after the timeout period (default is 5 minutes) the message disappears and the job is
canceled.
Note:
If you look at the Job Log in Command WorkStation, the job appears as canceled.
Workflow example 2
Assumptions:
•
Enable Job Mismatch
is
On
.
•
Mismatch Action
is set to
Suspend
.
•
Timeout
is set to
5 minutes
.
If a mismatch job occurs, the following happens:
1
An error message about the mismatch appears in Command WorkStation.
2
You have 5 minutes (the timeout period) to correct the mismatch, for example, by loading the correct size of
paper.
Configuration and Setup
Configuring print job management settings
52