1
Make sure that the E300 is not receiving, processing, or printing any files.
If the system has just finished processing, wait at least five seconds after the system reaches Idle before you
proceed.
2
You can now do any of the following:
•
Restart or reboot through Command WorkStation.
•
Restart, reboot, or shut down through the printer control panel.
Important:
Avoid using the power button to shut down the E300, as doing so may cause the system to
operate unpredictably. If you need to shut down the E300, we recommend shutting down through the
printer control panel. Use the power button only if the printer is off or the system is unresponsive to
keyboard or mouse actions. In this case, briefly press and release the power button.
Shut down, restart, or reboot from the printer control panel
1
Make sure the E300 is not receiving, processing, or printing any files. If the system has just finished processing,
wait at least five seconds after the system reaches Idle before you proceed.
2
On the printer control panel, press the
Home
button then the
Fiery
logo.
3
Press
Info
>
Server
.
4
Press
Restart Fiery
.
5
If prompted, log on as Administrator or Operator.
The default password is Fiery.1 (case-sensitive).
6
Select one of the following:
•
Restart Fiery
Restarts the E300 system software without rebooting the operating system software on the E300.
•
Reboot Server
Reboots the E300.
•
Shut Down
Shuts down the E300.
Restart or reboot from Command WorkStation
1
In Command WorkStation, click the
Server
menu.
Configuration and Setup
Integrating the E300 into your network
18