Retina Users Manual
Using the Audit Tab
To store the scan in a DSN click the down arrow in the
Output Type
drop down box and select DSN. You may
then select your storage location from the list of configured DSNs. To configure a DSN see
Using a DSN to Store
Session Data
on page 60.
5.
Enter the name you will use to identify the job in the
Job Name
field. If you do not enter a name, Retina will
prompt you for one when you click scan (you may disable that popup when you see it). If you continue past the
popup without naming the job it will be named “unknown.”
6.
If you wish to run a scan with registry access, click the down arrow in the
Credential
drop down box, and select a
pre-defined user to run the scan under. To set up pre-defined users see
Credential Management
on page 40.
Note
: If you want to start an audit scan at this point, click the
Scan
button. And go to step 10 of this procedure.
7.
Click
Ports
on the
Actions
pane.
The
Select Port Group(s)
options appear.
8.
Select any of the port group options you want Retina to scan. Deselect any of the following port group options that
you do not want Retina to scan. You can select more than one port group, in this manner you can combine
several custom groups for a single scan. Among others, we include:
All Ports – Scans on all ports
Discovery Ports – Scans those ports used in Discover
To modify port groups see
Modifying Port Groups
on page 37.
Note:
If you want to start an audit scan at this point, click the
Scan
button. And go to step 10 of this
procedure.
9.
Click the
Audits
sub-tab the
Select Audit Groups
pane appears. You may select from the pre-defined audits
that, as of this writing, are All, and 3 versions of the SANS 20 audits. Or you may select your own custom audit
groups that you have created. To create or modify audit groups see
Modifying Audit Groups
on page 39.
10.
Click the
Options
sub-tab and do the following as required:
All options affect the targeted device(s).
Perform OS Detection – Determine operating system on the target device.
Get Reverse DNS – Determine DNS name
Get NetBIOS Name – Determine NetBIOS
Get MAC Address – Determine MAC address of target NIC (only for Windows™ devices the local
segment.
Perform Traceroute – Track number of hops
Enable Connect Scan – Force a full TCP connection
34
Содержание Retina
