Cleaning Kit Process rev3.doc
1
Cleaning procedures for the My Vision X
Cl
eaning
K
it (Part number SE-00130-00)
My Vision X Cleaning Kit contains:
25 pre-moistened cleaning cards
6 Alcohol saturated snap swabs
1 pack of lint free wipes
Cleaning Kits may be ordered by faxing
your purchase order to (937) 291-2197.
Suggested cleaning intervals are defined in
this text but you might find more frequent
cleaning is warranted in increased volume
locations or in dusty environments.
Weekly Cleaning
It is suggested to run the cleaning card once
a week. This will remove dust and dirt
buildup from the rollers and image cameras.
This will extend the interval between
needed manual cleaning as described in the
Operator Manual for these components.
1. Remove Ink Cartridge if present during
the cleaning process then replace when
finished.
2. Next, start the imaging application again
and cycle the cleaning card through the My
Vision X . Run the cleaning card through
the My Vision X 3-7 times, each time
rotating the cleaning card top to bottom and
flipped over to a different orientation.
Cancel the application transaction and
discard the used cleaning card.
