Cleaning Kit Process rev3.doc
2
Transport
Dust and Debris will accumulate in the
transport from the checks being processed.
It is recommended to purchase canned
compressed air locally and blow out the
check path in the transport to remove any
debris and dirt from the sensors and track,
locations the cleaning cards cannot reach.
This should be performed during the weekly
maintenance. Please see the Operator
Manual section 5 for more instructions.
Ink Jet maintenance
Clean the ink jet cartridge once a week at
the same time the cleaning cards are run
through the My Vision X. Clean the ink jet
cartridge removed prior to running the
cleaning cards by wiping the nozzles with a
lint free wipe. Replace the cartridge in the
nest. Please see the Operator Manual
section 5 for more instructions.
Monthly
Streaks may develop on the image caused
by a build up of ink deposits. If a streak
develops on the image and running the
cleaning card does not remove streak,
remove the inner and outer covers, gently
open the front image camera and using an
alcohol saturated snap swab wipe down the
glass on both front and back cameras.
Close the front image camera and replace
both the inner and outer covers.
