-|Transparent Guide|-
TCD220024AB
2D Laser Scanners
LSE2 Series
PRODUCT MANUAL
For your safety, read and follow the considerations written in the instruction
manual, other manuals and Autonics website.
The specifications, dimensions, etc. are subject to change without notice for product
improvement. Some models may be discontinued without notice.
Major Features
•
90° detection angle, 5.6 × 5.6 m detection range
•
Compact size for flexible installation (W 120 × H 47.5 × L 89.4 mm)
•
Various filter function to prevent malfunction due to fog, rain, snow and dusts
•
Operation indicator to identify operation status and errors
: check status even in unstable conditions or change in installation location
•
Ethernet communication supported
•
Dedicated software atLiDAR provided
: PC, Mobile (Android)
Safety Considerations
•
Observe all ‘Safety Considerations’ for safe and proper operation to avoid hazards.
•
symbol indicates caution due to special circumstances in which hazards may occur.
Warning
Failure to follow instructions may result in serious injury or death.
01.
Fail-safe device must be installed when using the unit with machinery that
may cause serious injury or substantial economic loss. (e.g. nuclear power
control, medical equipment, ships, vehicles, railways, aircraft, combustion
apparatus, safety equipment, crime / disaster prevention devices, etc.)
Failure to follow this instruction may result in economic loss, personal injury or fire.
02.
Do not use the unit in the place where flammable / explosive / corrosive gas,
high humidity, direct sunlight, radiant heat, vibration, impact, or salinity
may be present.
Failure to follow this instruction may result in fire or explosion.
03.
This product is not safety sensor and does not observe any domestic nor
international safety standard.
Do not use this product with the purpose of injury prevention or life
protection, as well as in the place where economic loss maybe expected.
04.
Do not connect, repair, or inspect the unit while connected to a power source.
Failure to follow this instruction may result in fire.
05. Check connections and connect cables.
Failure to follow this instruction may result in fire.
06. Do not disassemble or modify the unit.
Failure to follow this instruction may result in fire.
Caution
Failure to follow instructions may result in injury or product damage.
01. Do not stare at the laser emitter.
Failure to follow this instruction may result in eye damage.
02.
Use the unit within the rated specifications.
Failure to follow this instruction may result in fire or product damage.
03.
Use dry cloth to clean the unit. Do not use water or organic solvent when
cleaning the unit.
Failure to follow this instruction may result in fire.
04.
Do not apply high pressure to the laser scanner to clean it.
Cautions during Use
•
Follow instructions in ‘Cautions during Use’. Otherwise, it may cause unexpected accidents.
•
Power supply should be insulated and limited voltage / current or Class 2, SELV power
supply device.
•
After supplying power, the sensor performs self-check for about 10 sec. When self-
checking, error occurrence, and teaching, the laser scanner outputs the same as it sensed
obstacle.
•
Do not arbitrarily extend the length of the laser scanner power I/O cable and
communication cable. It may cause malfunctionMutual optical interference between laser
scanners and photoelectric sensors may result in malfunction.
•
Mutual optical interference between laser scanners may result in malfunction.
•
Do not touch or contaminate the laser scanner front cover. It may cause malfunction.
•
Objects cannot be scanned when covering the front cover of the laser scanner.
•
When the laser scanner is moved to another position, use it after re-teaching.
•
Do not drop the unit. It may cause malfunction.
•
Installing the laser scanner in the place where smoke, fog, dust, or corrosion is heavy may
result in malfunction.
•
When installing the laser scanner outdoors, take protective measures. Otherwise, it may
result in product damage.
•
Keep away from high voltage lines or power lines to prevent inductive noise. In case of
installing power line and input signal line closely, use line filter or varistor at power line and
shield wire at input signal line.
•
Do not use the laser scanner near the equipment which generates strong magnetic force or
high frequency noise.
•
Cover with shields, hoods, or etc. to prevent direct incidence of strong light (direct rays of
sunlight, incandescent) into the laser scanner beam spread angle.
•
Fix the laser scanner in position with the fixing screw. Vibration may result in malfunction.
