Installing the L Series Scanner for Direct Scanning & Copying
Page 1 of 14
Canon
Items Needed at the Installation Site:
Standard Tool Kit
L Series Scanners L24 & L36 Service Manual (available from the Colortrac
Support Website)
http://www.lseries.colortrac.com
User name:
canon
Password:
scann1ng
(note the ‘i’ is a number 1)
imagePROGRAF iPF670 or iPF770 Service Manual (for
printer installation)
Blank USB2 Flash drive, preformatted FAT 32;
must be able to store at least
25Mb of data. This Flash drive can be used to update the scanner firmware.
Please Note: Install the imagePROGRAF printer first and verify proper printer operation using roll media before proceeding to install the scanner.
Scanner Unboxing & Initial Preparation:
1.
Unbox the scanner, locate the following items in the scanner’s box and put each item aside for now:
Scanner Power Supply
Ethernet cable
Document Return Guides:
L24 model has 1 guide
L36 model has 3 guides
Calibration/Stitch Target/sheet
2 Scanner Mounting brackets and 2 Thumb screws
2.
Attach both Scanner Mounting brackets on the imagePROGRAF printer by:
3.1. Removing the 4 printer covers shown below
3.2. Fit and mount both left and right brackets as shown below using the supplied screws. The screw locations are shown with 3 small red arrows.
3.3. Replace both left and right lower covers
only,
as shown with 1 large, dark blue arrow.
Left Side bracket
Right Side Bracket
