EE Bright Box User Manual
194
Fast Path link.
Interleaved Path FEC
Correction
These values are the count of Forward Error
Correction (FEC) detected on the ADSL line with an
Interleaved Path link.
Fast Path CRC Error
These values are the count of Cyclic Redundancy
Check (CRC) errors detected on the ADSL line with a
Fast Path link. The values represent a re-sent packet
due to corruption and may indicate noise on the line.
Interleaved Path CRC Error
These values are the count of Cyclic Redundancy
Check (CRC) errors detected on the ADSL line with
an Interleaved Path link. The values represent a re-
sent packet due to corruption and may indicate
noise on the line.
Loss of Signal Defect
These values are the count of events where a
temporary loss of signal between the exchange and
the router has been recorded, but the ADSL
connection has not been lost.
Fast Path HEC Error
These values are the count of Header Error Check
(HEC) errors detected on the ADSL line with a Fast
Path link. This is a count of the errors on an ATM cell
header. A high number of HEC errors in a short time
period may cause throughput to slow down.
Interleaved Path HEC Error These values are the count of Header Error Check
(HEC) errors detected on the ADSL line with an
Interleaved Path link. This is a count of the errors on
an ATM cell header. A high number of HEC errors in
a short time period may cause throughput to slow
down.
Error Seconds
These values are the count of the number of
seconds where at least one error has been detected
over the ADSL line.
SYSTEM LOG
The System Log shows a list of important events that have occurred since your router was
last powered on or restarted. The log can be used to troubleshoot issues with your broadband
connection, and can also be saved to a text file for later diagnostics.
The log is displayed in descending order by time (most recent events first).
To access the System Log:
1.
Login to the router’s admin pages.
2.
Click on the Advanced Set-Up tab and click Accept on the ‘Please proceed with
caution’ page.
3.
Click on System in the left hand navigation menu to expand the System menu:
4.
Click on System Log on the left hand menu:
