Edwards iXM Series, Инструкция по эксплуатации

Страница: 56 / 104

Description Typical display
Dry pump stator reference temperature TCS REF 100 °C
Dry pump temperature DP TEMP 100 °C
Dry pump exhaust stage temperature DP EXH STG 100 °C
Dry pump end cover temperature DP EC TEMP 100 °C
Dry pump motor temperature DP MTR TEMP 100 °C
Booster temperature MB TEMP 100 °C
Booster motor temperature
MB MTR TEMP
* 100 °C
Booster end cover temperature MB EC TEMP 100 °C
Dry pump power DP POWER 1.1 kW
Booster power MB POWER 1.1 kW
N
2
flow rate N
2
FLOW 44 slm
N
2
purge supply N
2
SUPPLY OK
Dry pump speed in percent DP SPEED 100%
Dry pump speed in Hz DP SPEED 100 Hz
Booster speed in percent MB SPEED 100%
Booster speed in Hz MB SPEED 100 Hz
Dry pump inverter temperature DP INV TEMP 100 °C
Booster inverter temperature MB INV TEMP 100 °C
Dry pump exhaust pressure EXHAUST 5 PSI
Dry pump exhaust temperature EXH PIPE 100 °C
Dry pump exhaust gas temperature EXH TEMP 100 °C
Active gauge pressure AG 1.1E-3 kPa
Water flow rate WATER 11.1 l/m
Run hours RUN HOURS 1000
Number of pump starts PUMP STARTS 100
Time to stop (seconds) TIME TO STOP 900
Active alarms and warnings (if present)
*
In case of TX variants, booster temperature is displayed.
Setup menu
1. Press the Setup button to enter the menu. Menu title is shown at the top of the
display. Press up/down keys to scroll.
2. Press ENTER to open a sub menu or CANCEL to return to Normal menu.
Table 22
Setup menu
Description Display
Commands menu
* Command Menu...
Display Inverter Fault History menu Inv Fault Hist...
10/2020 - ©Edwards Limited Page 53 M56635880_D
M56635880_D - Commission