Edwards iXM Series, Инструкция по эксплуатации

Страница: 4 / 104

This product has been manufactured under a quality management system certified to ISO 9001:2015
A
DDITIONAL
L
EGISLATION AND
C
OMPLIANCE
I
NFORMATION
EU EMC D
IRECTIVE
: C
LASS
A
EQUIPMENT
Caution: This equipment is not intended for use in residential environments and may not provide adequate protection to
radio reception in such environments.
EU R
O
HS D
IRECTIVE
: M
ATERIAL
E
XEMPTION
I
NFORMATION
This product is compliant with the following Annex III Exemptions:
• 6(a) Lead as an alloying element in steel for machining purposes and in galvanised steel containing up to 0.35 %
lead by weight
• 6(b) Lead as an alloying element in aluminium containing up to 0.4% by weight
•
6(c) Copper alloy containing up to 4% lead by weight
•
7(a) Lead in in high melting temperature type solder (i.e. lead based alloys containing 85% by weight or more lead)
• 7(c) I Electrical and electronic components containing
lead
in a glass or ceramic other than dielectric ceramic in
capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound
• 7(c) II Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher
• 8(b) Cadmium and its compounds in electrical contacts
• 15 Lead in solders to complete a viable electrical connection between semiconductor die and carrier within
integrated circuit flip chip packages
• 34
Lead
in cermet-based trimmer potentiometer elements
EU REACH R
EGULATION
C
OMPLIANCE
This product is a complex article which is not designed for intentional substance release. To the best of our knowledge
the materials used comply with the requirements of REACH. The product manual provides information and instruction to
ensure the safe storage, use, maintenance and disposal of the product including any substance based requirements.
A
RTICLE
33 D
ECLARATION
:
This product does contain Candidate List Substances of Very High Concern above 0.1%ww by article as clarified under the
2015 European Court of Justice ruling in case C-106/14.
• 1,2-dimethoxyethane (EDGME) added to the Candidate List in June 2012
This substance is sealed within the case of the compact lithium coin cell battery and is essential to the long life and
reliable performance of the battery.
• Cadmium (Cd) added to the Candidate List June 2013
As indicated by the applied RoHS exemption above, this substance is present in electronic componentry
• Lead (Pb) added to the Candidate List June 2018
As indicated by the applied RoHS exemption(s) above this substance is present in certain aluminium/brass/steel/electrical
or electronic components
A
DDITIONAL
I
NFORMATION
The products listed are also in scope for and comply with the requirements of the following:
UL61010-1
3 rd Edition
Safety requirements for electrical equipment for measurement, control and
laboratory use – Part 1: General requirements
SEMI S2-0715a Environmental health and safety guideline for semiconductor manufacturing
equipment
SEMI S2-1016* Environmental health and safety guideline for semiconductor manufacturing
equipment
SEMI S8-0915 Safety Guidelines for ergonomics engineering of semiconductor Manufacturing
Equipment
SEMI F47-0706 Specification for semiconductor processing equipment voltage sag immunity
* iXM3000